Related News

The parties will develop mass flow meters to measure cryo-compressed hydrogen flow during distribution trailer filling and vehicle fueling

‍San Francisco, California & Odelzhausen, Germany, November 7^th, 2024 — Verne and Rheonik announced a technical collaboration to develop mass flow meters for cryo-compressed hydrogen applications. Verne and Rheonik will collaborate to adapt the Rheonik Omega Coriolis mass meter to support the growing demand for cryo-compressed hydrogen in the distribution and mobility markets.

 Hydrogen can enable decarbonization of up to 25% of U.S. energy-related emissions in some of the hardest-to-decarbonize sectors, including iron & steel production, chemicals manufacturing, off-road equipment and heavy-duty transportation. However, hydrogen adoption is currently hindered by expensive, inefficient hydrogen distribution and storage. Verne’s breakthrough cryo-compressed hydrogen technology enables low-cost hydrogen distribution by maximizing hydrogen density on delivery trailers and minimizing the cost of densifying the hydrogen. The improvements to hydrogen distribution will make the use of clean hydrogen economical for existing industrial users of hydrogen and will unlock new use cases of hydrogen, such as off-road equipment, and heavy-duty trucks. These growth sectors could more than double hydrogen distribution demand by 2030 and enable hydrogen to replace diesel in the most demanding sectors of the economy.

 Verne and Rheonik’s partnership aims to establish a reliable supply of proven flow metering to enable commercial CcH₂ filling of hydrogen distribution trailers and heavy-duty vehicles. Rheonik is a leading developer of mass flow solutions for extreme applications with devices already being used in approximately 2,000 hydrogen filling stations, and in oil & gas, marine, petrochemical and many other applications.

Verne develops cryo-compressed hydrogen storage systems and densification equipment that converts gaseous hydrogen into CcH₂ to fill distribution trailers and heavy-duty vehicles. Verne is focused on developing the full ecosystem of CcH₂ suppliers. Previously, Verne announced a partnership with ARTA to develop nozzles and receptacles for CcH₂ filling, a partnership with Cryostar to develop pumps for “future-proofed” hydrogen filling stations and a partnership with LifeGuard Technologies to develop flexible hoses for CcH₂filling. This partnership with Rheonik is an important next step in enabling commercial use of CcH₂ in hydrogen distribution and heavy-duty transportation.

 In 2023, Verne completed drive testing of a CcH₂ storage system onboard a vehicle and demonstrated a world-record 29 kg storage tank at Lawrence Livermore National Laboratory, validating the high-densities of cryo-compressed hydrogen. Verne recently announced the completion of the world-first CcH₂ Class 8 truck, with drive testing set to take place later this year. Verne is also working with leading hydrogen distributors and vehicle manufacturers to pilot the technology starting in 2025.

 “The hydrogen industry is in desperate need of an efficient hydrogen distribution method. Cryo-compressed hydrogen distribution will meet this critical industry need, and reliable mass flow meters will be critical for commercial roll-out of CcH₂ filling stations for distribution trailers and vehicles,” said Bav Roy, Verne Co-founder & COO. “Rheonik’s decades of experience making high-quality mass flow meters makes them the perfect partner.”

“Accurate mass measurement of CcH₂ in the distribution channel is an essential step in the implementation of CcH₂ filling stations. The unique design of Rheonik's Omega Coriolis metering platform offers the perfect solution to the challenges of CcH₂ measurement. In partnership with Verne, we will be able to specifically optimize our flow meters for this application,” said Maximilian Weber, Application Engineering Manager at Rheonik.

About Verne

Verne was founded in 2020 to develop high-density hydrogen storage solutions required for deep decarbonization. Verne’s platform unlocks zero-emission operations in sectors including industrial hydrogen use, off-road equipment, and heavy-duty transportation. Verne is financially supported by leading commercial entities, including Trucks Venture Capital, Collaborative Fund, Amazon’s Climate Pledge Fund, NextEra Energy Resources, United Airlines Ventures Sustainable Flight Fund, Caterpillar VC, and Newlab. Verne is also supported by Breakthrough Energy Fellows, the Department of Energy’s ARPA-E, The U.S. Army, Alberta Innovates and other agencies. For more information, visit www.verneh2.com.

 Company contact: contact@verneh2.com

 About Rheonik

Rheonik was founded in 1986 to develop a mass flow meter based on the new Coriolis measuring principle. Since returning to private ownership in 2014, the Rheonik Omega metering platform has been significantly updated and enhanced. Rheonik’s state-of-the-art product range has been met with great acceptance in the market and has opened many new business areas for the company.

Rheonik is recognized as the global leader in the supply of Coriolis flow meters for hydrogen metering applications. As a pioneer in hydrogen flow measurement, Rheonik is constantly developing technical innovations for new applications in this field. For more information, visit www.rheonik.com.

 Company contact:info@rheonik.com

Hydrogen Storage Startup Promises Diesel-Equivalent Range, Will Trial Dual-Fuel VNL 760 First

A 2019 Volvo VNL 760 will serve as the initial testing ground for an innovation its developer believes could increase the range and cut the cost of every hydrogen-fueled Class 8 tractor manufacturers envision building as part of the gradual decarbonization of the freight sector.

San Francisco-based Verne plans to offer truck makers — whether they are building dual-fuel, hydrogen internal combustion engine or hydrogen fuel cell electric models — the option of cryo-compressed hydrogen storage to achieve the same range as a diesel tractor.

The startup, founded in 2020, believes cryo-compressed hydrogen can offer a denser form of hydrogen storage that improves vehicle range and payload.
‍

‍
Read the full article from Keiron Greenhalgh: https://www.ttnews.com/articles/verne-nears-hydrogen-pilot

The parties will develop high-flow, flexible hoses to support fueling heavy-duty vehicles with cryo-compressed hydrogen

‍

San Francisco, California & Newton Square, PA July 23, 2024 — Verne and LifeGuard Technologies announced a Memorandum of Understanding to develop high-flow, flexible safety hoses for cryo-compressed hydrogen fueling of heavy-duty vehicles. The two companies will collaborate to accelerate the development of the refueling hoses with the goal of entering commercial production in 2027.

Heavy-duty transportation is responsible for 12% of U.S. greenhouse gas emissions, and current zero-emission solutions do not meet the needs of heavy-duty vehicles. Battery electric trucks provide limited range and add 5,000+ pounds to the weight of the truck, reducing the payload available to haul cargo. Current hydrogen trucks, which store hydrogen as a compressed gas onboard, offer improved performance relative to battery electric trucks but still fail to meet the required range and payload of heavy-duty vehicles. Cryo-compressed hydrogen (CcH₂) achieves an 87% improvement in density relative to 700 bar compressed hydrogen and a 33% improvement over liquid hydrogen, allowing CcH₂ trucks to achieve diesel-equivalent range and payload.

Development of new infrastructure and components is required to support commercialization of CcH₂,and Verne and LifeGuard’s partnership will establish a US-based supply of high-flow CcH₂ safety hoses that enable fueling of trucks and other heavy-duty vehicles. The partnership will combine LifeGuard’s expertise in safety-critical solutions for cryogenic fluid transfer and Verne’s expertise in CcH₂ and access to world class testing facilities. The partners will collaborate to develop and test hoses suitable for refueling heavy-duty vehicles with CcH₂in less than 10 minutes.

Cryo-compressed hydrogen is a platform technology with applications across heavy-duty transportation and hydrogen distribution. The flexible hose technology can be adapted to serve sectors including trucking, aviation, port vehicles, mining and maritime transportation.

Verne develops cryo-compressed hydrogen storage tanks and refueling equipment that converts gaseous hydrogen into CcH₂. In 2023, Verne completed drive testing of a CcH₂ storage system onboard a vehicle and demonstrated a world-record 29 kg storage tank at Lawrence Livermore National Laboratory, equivalent to the tank size that would be used in heavy-duty trucking. Verne recently announced the first demonstration of CcH₂ onboard a Class 8 Truck, set to take place in late 2024. 

Verne is focused on developing the supplier base for CcH₂. In November2023, Verne announced a partnership with ARTA to develop nozzles and receptacles for CcH₂ fueling. Last month, Verne and Cryostar announced a new partnership to develop pumps for “future-proofed” hydrogen fueling stations. Verne’s partnership with LifeGuard Technologies is an important next step in enabling the full ecosystem of suppliers for CcH₂ fueling solutions.

“The trucking industry is demanding greater vehicle range and lower weight than current zero-emission options offer, and cryo-compressed hydrogen is well placed to meet the need given its greater hydrogen storage density,” said Ted McKlveen, Co-founder & CEO of Verne. “LifeGuard is a best-in-class developer of flexible safety hoses and is the ideal partner for developing the solutions needed to enable a massive transition to CcH₂.”

“At a time when the hydrogen industry is on the cusp of massive expansion, it is critical that safety leads the way. Now, high-flow CcH₂ hydrogen transfer hoses will have the same technological safety features that our CNG, LPG,NH₃ and high pressure hydrogen and atmospheric gas hoses have enjoyed for more than 20 years,” stated Andy Abrams, Executive Vice President of LifeGuard Technologies. “We look forward to working with Verne, a true leader in the hydrogen industry, and to offering this new hose design to our Compressed Gas and Petrochemical customers through our global network of locations helping to drive LifeGuard Safety Hose adoption even further into the hydrogen industry.”

About Verne

Verne was founded in 2020 to develop high-density hydrogen storage solutions required to decarbonize heavy-duty transportation. Verne’s platform unlocks zero-emission operations in sectors including trucking, aviation, port vehicles, mining, and hydrogen distribution. Verne is financially supported by leading commercial entities, including Trucks Venture Capital, Collaborative Fund, Amazon’s Climate Pledge Fund, Next Era Energy Resources, United Airlines Ventures Sustainable Flight Fund, Caterpillar VC, and Newlab. Verne is also supported by Breakthrough Energy Fellows, the Department of Energy’s ARPA-E, The U.S. Army, Alberta Innovates and other agencies.

For more information, visit www.verneh2.com.

Company contact: contact@verneh2.com

About LifeGuard Technologies

LifeGuard Technologies is a safety technology company with its headquarters in Philadelphia, Pennsylvania and satellite affiliated factories in Bethlehem, PA; Ontario, Canada; Motala, Sweden; Faridabad, India and Melbourne, Australia. The company’s patented and patent-pending safety hose technology has become a global standard for all industries, applications and pressures. The company’s roots began with Joe Abrams’ work in cryogenics in 1958 – and today, the company has hoses worldwide in all industries and applications. More than 500,000 hoses with this technology have been sold since its invention including to all Tier One and Tier Two gas companies, making it the ‘Hose of Choice’ for the industrial and compressed gas industry.  

For more information, visit: https://lifeguard-tech.com/

Company contact: info@lifeguard-tech.com

‍

‍